Shock Absorber
Most front-loading washers have shock absorbers that reduce the machine movement during the spin cycle. These shock absorbers are usually attached to the tub and the base frame of the machine. To assess the condition of this part, you must remove the rear or front panel of the machine. If you notice that the shock absorbers are damaged or broken, you must replace them immediately. If you don’t have the tools to replace the shocks, you can get help from a washer repairman.
When the shock absorbers are damaged, they will unbalance the loads and cause the washer to move or shake. The home appliance will make loud banging sound when the washtub rotates. If steps are not taken to troubleshoot the problem, it can damage other components.
Tub and Suspension Spring
Suspension springs of the washer are used either to stabilize the washer tub assembly to the base or to suspend the tub from the washer cabinet. These suspensions also absorb the vibrations of the washtub when the tub spins. When these springs are damaged, you can hear excessive noise from the home appliance during the spin cycle. To assess the condition of the suspension springs, you must remove the front or top outer panel of the washer. Visually inspect the springs and replace them, if necessary.
Snubber Ring
Some washers have a snubber ring that reduces vibration during the spin cycle. The ring is usually located at the bottom of the washer and it provides cushion to the tub support assembly and the washer base. When the ring wears out, it allows the washtub to move excessively, which can cause the washer to shake uncontrollably. To visually inspect the ring, you must remove the front panel. If you notice white dust on or near the ring, it indicates that the ring is worn out and must be replaced. To replace the ring, you must first remove the tub
springs.
Tub Dampening Strap
Some washers have straps that reduce vibration during the spin cycle. The straps are attached to the corner of the cabinet and top of the washtub. The straps are made of soft rubber that can wear out due to regular use. When the strap is worn out, the washtub can come in contact with the cabinet, which can cause the machine to shake. This can create loud banging sound. If the straps are damaged, you must replace all the straps at the same time. Changing the straps may not be easy, and it is in your interest to get help from a washer service
technician.
Check Out The Popular Cities We Cover and Service:
San Francisco CA dish washer repair, Little Rock, Orlando, New Haven dishwasher repair, Eugene, Tacoma, Jackson, dishwasher repair Phoenix, New York City dishwasher service, dishwasher service Middletown, Jacksonville dish washer service, Everett, Indianapolis, Tampa, Lakewood, dish washer repair Philadelphia, Atlanta GA appliance repair, St. Louis, Cleveland, appliance repair San Jose, Birmingham, Milwaukee, Portland, Oklahoma City, Allentown, Sacramento dishwashing machine repair, Kansas City, Colorado Springs, Billings, Salt Lake City, Raleigh, Tallahassee, San Antonio TX dishwasher service, Albuquerque, Austin, Columbia, Provo, Baltimore, Nashville, Dallas, Denver, Seattle, Virginia Beach, Columbus, Miami, Olympia, appliance repair Los Angeles CA, Manchester, appliance repair Tucson AZ, appliance service Las Vegas, Minneapolis, Newark, Detroit, Richmond, Baton Rouge, Henderson, dishwasher service San Diego, Charlotte NC dishwasher repair, Chicago, Boston, Silver Spring, Bowie, Aurora, Providence, Reno City, Fort Worth, Louisville, Pittsburgh, Portland, Omaha, Charleston SC appliance service, Houston
The post How to Fix A Washer That Shakes and Moves appeared first on OnSite Appliance
No comments:
Post a Comment